How to Set Memory on Powerbuilt Digital Torque Adapter

Question:

Hi What are the steps to set memory 1 Turn on the unit 2 Set the torque to 92 lb 3 Next what

asked by: Sam

Expert Reply:

The memory isn't something you set through the buttons on the # ALL940962. When operating in peak mode it stores the torque memory from the maximum torque applied. It automatically stores up to 50 peak torque values. To recall stored torque values from the memory, press "Mem" button for at least 1 second, then release. The display will show the memory number as "P01" then "Torque value". Press "Mem" button at least 1 second one more time. The display will show the memory number as "P02" then "Torque value". "P01" is the latest reading. "P50"will be the oldest reading.

expert reply by: Robin H

Sam

3/18/2024

Hi Robin, The instructions in the box were clear. So, if I understand you correctly. If I torque my camper to 92-foot lbs., and the next time I press P01, it should be registered as 92. Thank you,