Wet Bolt For 1-3/4" Double Eye Springs Without Silver Coating
Question:
Do you have a version of this wet bolt that does not have the silver coating? If so what is the product number? Usable 9/16 inch diameter shoulder is 2 and 5/16 inches.
asked by: David G
Expert Reply:
There is a similar but not exact version of the Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 without the silver coating. The closest is the following:
- Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs # 126B2
The # 126B2 has the same 9/16" diameter and usable length of 2-5/16" but has a 9/16"-18 fine thread compared to the 7/16"-20 thread of the bolt you asked about.
Products Referenced in This Question
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Step Wet Bolt for 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Suspension Bolts
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch Diameter
- 3-5/8 Inch Long
- Redline
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Q&A: How to Replace a 4-Way Trailer Connector with 8 Wires
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Article: Best Camper Jacks
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: How To Add a Fuel Tank To a Truck with 5th Wheel Hitch In Bed
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
David G.
3/12/2024
Thanks Kyle. The original bolt was part of a Lippert Equa-Flex system with a 7/16 inch thread and lock nut. Can the 9/16 inch thread version be used as a compatible OEM substitute?