What is The Mounting Offset For the 8" Steel Trailer Wheel # AM20021?
Question:
Item #AM20021 What is the mounting offset in relation to the inside of the rim? I am 3D modeling a new design and am using this size wheel. However, I need to make sure to accurately model the wheel for clearances with body components. Any help would be greatly appreciated!
asked by: J. Z
Expert Reply:
The Steel Trailer Wheel # AM20021 has 0 offset so the mounting flange is at the center of the wheel. Do understand the wheel size is 8" diameter and 7" wide but these measurements are for the bead seats inside the lips of the wheel. The lips for each bead seat on this wheel are going to add approximately 3/8" to both the height and width of the wheel so you innermost part is going to be 3-7/8" from the mounting flange for the outer lip.
Product Page this Question was Asked From
Steel Trailer Wheel - 8" x 7" Rim - 4 on 4 - White
- Trailer Tires and Wheels
- Wheel Only
- 8 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Americana
more information >
Continue Researching
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Wheel to Use with 20x10.00-8 Size Tire
- Q&A: Will Americana 8 x 7-Inch Steel Trailer Wheel # AM20023 Fit 18 x 9.50 - 8 Size Tires
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Looking for Replacement 8 Inch by 7-1/2 Inch Wheels for a Toro Zero Turn Mower
- Q&A: Would These Wheels Work on a Zero Radius Turn Mower?
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: Most Popular Wheel Bearings
- Article: How to Use a Roof Rack (Like a Boss)
- Article: Trailer Maintenance Schedule
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: 2023 Best Gifts for RVers & Campers