Recommended Hub and Drum Assembly for 7K Axles
Question:
I am looking for a replacement electric brake and hub kit for axels that are approx 7000#. The inner bearing is 1.75 and outer is 1.25 and the brake mounting flange is a 4 bolt patten with the holes 4” on center.
asked by: Kirk
0
Expert Reply:
For your 7K axles you can use the Trailer Hub and Drum Assembly # LC53UD. This kit has a hub with an integrated drum, will work with your 1.75" inner and 1.25" outer bearings, and also includes additional bearings, races, and seals.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Lippert
more information >
Continue Researching
- Q&A: Are The Dexter Nev-R-Adjust Trailer Brakes Compatible With Lippert Hub/Drums on 2020 GD Solitude 380
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Hub/Drum For Lippert Hub Stamped 122093
- Article: Trailer Wiring Diagrams
- Q&A: Will 6,000 lb Easy Grease Trailer Hub Replace Lippert Hub 814202
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Measure a Trailer Axle
- Q&A: Height from Mounting Flange to Top of Grease Cap of etrailer Hub # AKHD-655-6-K
- Article: The 4 Crucial Choices You'll Make When Buying a Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Most Popular Wheel Bearings
Kirk
3/4/2024
Bryce, thank you. What brake plate do you offer that will bolt to a 4 bolt flange 4” on center that will work with this hub?it does not appear to be included with this hub.