Do You Need To Remove Existing Wheel Weights To Use Balancing Beads CA55FR?
Question:
Do you need remove the existing wheel weights?
asked by: John R
0
Expert Reply:
No, you do not need to remove the existing wheel weights in order to use the Counteract Tire Balancing Beads # CA55FR. Although, if the wheel is already properly balanced and weighted, you really should not need balancing beads. So if you are having problems with the tires vibrating while driving, the balancing beads may help, but there may be an underlying cause other than tire balance.
expert reply by:
Jesse M
0
Products Referenced in This Question
Counteract Tire Balancing Beads for 1/2-Ton, 3/4-Ton, and 1-Ton Trucks - 4 Tires
- Tire Balancing Beads
- Pickup Trucks
- 4 Tires
- Injector Bottle
- Self-Sealing Valve Cap
- Tube
- Valve Core
- Valve Core Remover
- 15 Inch
- 16 Inch
- 16-1/2 Inch
- 17 Inch
- 17-1/2 Inch
- 18 Inch
- 20 Inch
- 22 Inch
- 6 oz Bag
- Counteract
more information >
Product Page this Question was Asked From
Counteract Tire Balancing Beads for 1/2-Ton, 3/4-Ton, and 1-Ton Trucks - 4 Tires
- Tire Balancing Beads
- Pickup Trucks
- 4 Tires
- Injector Bottle
- Self-Sealing Valve Cap
- Tube
- Valve Core
- Valve Core Remover
- 15 Inch
- 16 Inch
- 16-1/2 Inch
- 17 Inch
- 17-1/2 Inch
- 18 Inch
- 20 Inch
- 22 Inch
- 6 oz Bag
- Counteract
more information >
Continue Researching
- Shop: Counteract Tire Balancing Beads for 1/2-Ton, 3/4-Ton, and 1-Ton Trucks - 4 Tires
- Shop: Counteract Tire Balancing Beads for 1/2-Ton, 3/4-Ton, and 1-Ton Trucks - 4 Tires
- Shop: Counteract Tire Balancing Beads Single Pack for Trailers - 4 oz
- Search Results: tire balancing beads
- Video: Counteract Tire Balancing Beads Review
- Shop: Westlake ST235/75R15 Radial Tire w 15" Phoenix Aluminum Wheel - 5 on 4-1/2 - LR D - Matte Black
- Q&A: Counteract Tire Balancing Bead Bag Size for 235/75R17.5 Trailer Tires
- Q&A: Difference Between 10K Demco eZ-Latch Couplers
- Q&A: Will The Tensioner For Bulldog Winches Work On A Smittybilt 9500 XRC Winch?
- Q&A: Winch Tensioner Compatibility with Smittybilt X20 10,000 lb Winch
- Q&A: Width of ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 Winches # CU881087
- Q&A: Can Demco Spare Tire Carrier Bolts for Holding Spare Tire be Swapped Out
- Q&A: Can Counteract Tire Balancing Beads be Installed With TPMS on Valve Stem
- Article: Replacement Automotive Lighting
- Article: Troubleshooting Brake Controller Installations
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
John R.
2/28/2024
Thanks, good info! I’m pretty happy with existing balancing on my 1/2 ton pickup, but maybe it could even better?