Trouble Shooting a Brake Controller with No Power on a 2006 Chevrolet Silverado

Question:

i dont hab pawer in the brake control box i plug in the factory conector bad i don hab pawer waht i do

asked by: germahin

Expert Reply:

The first thing to check is to make sure that the plug is connected to the right port. There are at least two that the plug will fit into. Underneath the cover, you will go to the top row, 2nd from the left most port. If you are plugged into the left most port, the controller will not work. I have included a link to a brake controller install on a 2004 Chevy Suburban that shows where you should plug into.

If this is not the problem, please write back with the part numbers for the brake controller and the harness.

expert reply by: Patrick B