Brackets for Installing Fulton Trailer Fenders
Question:
What mounting hardware do i need to install the following fenders. F008585-2
asked by: Ryan
Expert Reply:
Hey Ryan, the bracket kit part # PF1135-BKT-2 is normally the best solution as long as the trailer has a frame rail that runs the perimeter of it. Then if the frame is 2 inches wide you would want the part # CE15284GA and you'd be set.
The other option is L-brackets like the part # CE26098G-2 which are a bit more universal but do require drilling so they are a little more involved to install.
Products Referenced in This Question
CE Smith U-Bolt - Galvanized - 4-13/16" Long x 2-1/16" Wide x 1/2" Diameter - Qty 1
- Boat Trailer Parts
- U-Bolts
- Galvanized Steel
- 4-13/16 Inch Long
- CE Smith
more information >
Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic - 15" Wheels - Qty 2
- Trailer Fenders
- Top and Side Step
- 15 Inch Wheels
- 10 Inch Wide
- 45 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 2-3/4 Inch Wide
- Brackets
- 13-1/4 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 6-1/2 Inch Wide
- Brackets
- 8-1/4 Inch Tall
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- CE Smith
more information >
Continue Researching
- Q&A: How To Bolt-On, Weld On Trailer Fenders
- Article: Trailer Wiring Diagrams
- Q&A: Need Adapter For Vehicle With A 7-Pin Round Plug And A Trailer With A Standard 7-Way
- Q&A: Replacement Fenders for a Sundowner 737 Horse Trailer
- Q&A: Trailer Fender Installation Clearance and Mounting Project
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Strength of Steel Fender to Withstand 200 lb Utilizing as a Step
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Could Single Axle Trailer Fender # CE18041ATB be Reinforced to Support Weight
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer