Torque Spec for 10 inch Brake Assemblies
Question:
What is the torque spec for the bolts connecting a 10k braking assembly like part AKEBRK-10 to the spindle?
asked by: Mark
0
Expert Reply:
Hey Mark, 45 to 70 lbs is the recommended torque rating for the 4 bolts that hold 10 inch brake assemblies to a trailer like the part # AKEBRK-10.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 10000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring the Breakaway Switch to Dexter Electric Over Hydraulic Drum Trailer Brake Actuator
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Replacement Axle Nut And Tang Washer For A Dexter 10K Axle Made In 1999
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Where to Position the Trailer Axle?
- Q&A: What Causes Tire Cupping on a Trailer Tires
- Q&A: Can a Trailer With a 50MM Coupler Be Safely Towed With a 1-7/8" Hitch Ball?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: What is Distance Between Mounting Holes of Dexter A-60 Coupler
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle