Which Trailer Spindle For CE Smith Hub CE13311
Question:
what spindle can be used with smith hub kit 13311
asked by: Peter K
Helpful Expert Reply:
For the CE Smith Trailer Hub Assembly # CE13311 you'll need a spindle for a 2,700 lb axle. We don't have one that works with that hub, but you'll just need to look for one that uses bearings L44649 for both the inner and outer bearing. Importantly, also be sure that the spindle is compatible with grease seal 12192TB, which has a 1.249" inner diameter, because there are spindles that are compatible with the L44649 bearings but don't have the right dimensions for the seal.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Grease Used in CE Smith Pre-Greased Hub CE13110
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can L44643 Bearings and L44649 Bearings Be Exchanged
- Q&A: Which Replacement Hub for Shoreland'r SLR22L Boat Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Printable Trailer Bolt Hole Pattern Template