After Installing New Hubs Do You Have to Break Them In
Question:
when you install the new hubs do you have to break them in?
asked by: Rick
0
Expert Reply:
There is no break-in procedure needed for the Trailer Hub Assembly, # 84545BX. Just pack the bearings and hub with grease and you are ready to go.
I have included a video which may be of help to you.
expert reply by:
Leah S
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Video: Packing Trailer Bearing Demonstration
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: D Washer for EZ Lube Spindles
- Search Results: bearing buddy
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Video: Kodiak Trailer Bearings Races Seals Caps - Caps - XLPROLUBE1980KIT Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Search Results: loctite
- Search Results: lock tight
- Search Results: dexter drum 8 247
- Search Results: high temp bearing grease
- Search Results: bearing buddy 1.980
- Search Results: oil bath hubs
- Q&A: Fit of Kodiak XLPROLUBE1980KIT on 3500 lb Spindles With 171255 Grease Seal
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: What Grease Comes with Grease Gun # L30132
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: What Grease Does The Pre-Greased Trailer Hub and Drum Assembly AKHD-545-35-K Use?
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: How to Switch From Grease Hubs to Oil Bath Hubs on 3500-lbs Axle
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84550UC1-EZ Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84550BX Review
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub