Replacement Axle For Damaged Dexter D60 With Hub Face Spacing of 86-1/2"
Question:
Do you have a replacement axle for Dexter D60, 6,000lb capacity axle which has hub face of 86.50 and spring center of 68.50?
asked by: Donald G
Helpful Expert Reply:
We have the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327826. While this does have the 86-1/2" hub face spacing you need you will need to weld new 2 new Spring Seats # TRSS300 on at your 68-1/2" measurement. This axle comes with the bare spindles so you will be able to reuse your current hubs and brakes. If you want to go ahead and get new hubs and brakes if they were also damaged we do have the Axle # 8327826-EB.
If you prefer to have the exact axle from Dexter with the correct spring centers you will need to place an special order from your local Dexter parts dealer.
Products Referenced in This Question
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 6000 lbs
- 6 on 5-1/2 Inch
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- Dexter
more information >
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K
- Q&A: Do Dexter Axles With 86-1/2 Inch Hub Face Have 71-1/2 Inch Spring Centers
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: 6,000 lbs Replacement Axle for a 2011 Keystone Montana
- Article: Trailer Wiring Diagrams
- Q&A: How Tight Should the Spindle Nut be on a Dexter 8,000 Pound Axle
- Q&A: Common Torque Specifications for Lug Nut Size
- Q&A: Lug Nut Torque Recommendation for Dexter Hub # 8-219-4UC3-EZ to 17.5 inch Wheel
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Double-Eye Trailer Suspension System Review
- Article: Using a Portable Generator on RV
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs