Need Replacement 61-Inch x 1-1/2-Inch Galvanized Axle for 1999 NuWay Fold-Up Trailer
Question:
I have a NuWay fold-up trailer 1999.Looking to replace the original axle with something comparable. The axle appears to be 61inch in length. Original part # NW27195. The axle is 1-1/2inch square galvanized. Thank You.
asked by: Craig
Expert Reply:
I was able to find an online reference to the axle part number you provided, NW27195, but this part is no longer offered by the original manufacturer and no substitute has been officially authorized.
We do offer 60-inch axles rated for 2000-lbs. All can be seen on the link provided. For example, part # 20440I-EZ-60 uses EZ-Lube spindles and idler hubs with a 4-on-4 bolt pattern and is suited for 8-12-inch wheels. This axle is intended for use with bearing # L44649, race # L44610 and grease seal 10-60, part # RG06-020.
If you want to use your existing hubs and wheels on the new axle you will need to match up the bearing numbers now on the trailer. You will also need to know the trailer GVW (gross vehicle weight), hub face-to-hub face measurement, wheel bolt pattern and the locations of the spring seats. These all must match your existing axle.
The linked article will help you identify your bolt pattern.
![Adam R](https://images.etrailer.com/static/images/catg/people/477_tn.jpg)
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: Axle Availability for a Small Jon Boat Trailer
- Q&A: Can a Different Axle be Installed on a Harbor Freight Trailer Frame that is 48 Inches Wide
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Recommended Replacement Axle for Harbor Freight Folding Trailer 62671
- Q&A: Parts Needed to Upgrade a Harbor Freight Axle
- Q&A: How to Pick Out Replacement Axle for Trailer By Measuring
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Article: Trailer Tire Sizing
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Stability Control for Heavy Duty Vehicles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Towing a Trailer? Let's Talk About Brake Controllers