Approx Weight Of e25GR Axle, e84SR Leaf Spring And AM30090 Wheel/Tire
Question:
Im designing a small aluminum boat trailer that can be hoisted onto a truck rack while traveling, leaving the hitch free to pull a camping trailer. Weight of course is important. The boat itself is light - approximately 175 lbs, and the aluminum trailer frame is approximately 90 lbs. Im trying to choose light weight, but correctly sized components. Im considering the following and wondering what the weight of each would be, or are there better suited components. Axle - e25GR 48inch mounting centers work fine Leaf Springs - e84SR Wheels/tires - AM30090 need 18inch OD Thanks.
asked by: Ron S
Expert Reply:
I can definitely provide you with the weight of each of those products. It appears the parts you mentioned will be the best options we can offer as far as low weight. See below.
Trailer Axle with Idler Hubs # e25GR
Weight - 32 lbs
3-Leaf Double-Eye Spring # e84SR
Weight - 7 lbs
Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel # AM30090
Weight - 12 lbs
I hope this helps. Good luck with your trailer build. Feel free to reach out if we can be of any additional assistance.
Products Referenced in This Question
Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 5.70-8
- 8 Inch
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-3/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: What Is The Speed Rating On The Kenda 5.30-12 Bias Trailer Tire # AM30710
- Q&A: Replacement Axle Recommendation for 49.5 Spring Center and 59.5 Hub Face Measurements
- Q&A: Availability of ST205/75R14 Trailer Tires In a Load Range E or F
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Trailer Tire Sizing
- Q&A: Solution for Replacement Hubs on Boat Trailer With L44649/LM11749 Bearings
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Brackets to Mount CE Smith Trailer Fenders
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Accurately Measure Trailer Leaf Springs