Replacement Bearing Kit for a #42 Spindle
Question:
Hi guys. Looking for bearings, seals, etc for my 1989 Cox single axle boat trailer. its ~20ft for a 20ft Grady white, so heavy. i cant find any numbers but i have measurements off the bearings to get close. outer bearing 1 1/4 ID, 11/16 wide. i dont have OD inner bearing 1 3/4 ID, 1 wide. 2 14/16 OD. Seal i found number 22550 stamped. Thanks in advance
asked by: Rob M
Expert Reply:
Thank you for all of the info!
It sounds like you have a #42 spindle which means the Bearing Kit # BK3-300 is what you're needing.
This has all of the specs matching to what you gave me when it comes to the ID of all the bearings and then the seal that comes with this kit is what we've matched to the 22550 number you found.
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13511 Review
- Search Results: hub dust cover
- Search Results: hub grease cap
- Q&A: Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: seal puller
- Search Results: center caps
- Search Results: 25580
- Search Results: lhlr103
- Search Results: lug nut
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: Bearing Kit With 25580 & 15123 Bearings For Lippert Axle
- Video: Ark Extreme Off-Road Ratcheting Trailer Jack with Dual Wheels Review
- Video: Ark Extreme Off-Road Trailer Jack Review
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Leaf Spring for 2021 Grand Design Imagine 3250BH
- Q&A: Replacement Bearings and Seals for Curt 5.2K to 8K Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams