Height of Ultimate Trailer Jack # 322-RDJ-2K When Positioned at Lowest Setting
Question:
On the Ultimate A-frame trailer jack, can you tell me the measurement from the mounting bracket to the top of the jack when the jack is fully extended down? Also, what is the measurement from the mounting bracket to the bottom of the jack without cranking the inner tube down? Thanks
asked by: Jim P
Expert Reply:
The Ultimate Trailer Jack # 322-RDJ-2K has a measurement of 7-1/4" from the mounting bracket to the top of the jack while in its lowest setting. This will place the bottom of the jack 13-3/4" below the mounting bracket in this position. You will have an additional 15-1/2" of travel left for a total height of 29-1/4".
Product Page this Question was Asked From
Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 28 Inch Lift
- Bolt-On
- Weld-On
- With Rectangle Foot
- Ultimate Jack
more information >
Continue Researching
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Article: Trailer Wiring Diagrams
- Q&A: How To Stop A-Frame Jack From Scrapping Ground While Going Over Bumps
- Q&A: Lowest-Profile A-Frame Trailer Jack For Tailgate Clearance
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Dimensions for the 10K Demco eZ-Latch A-Frame Trailer Coupler
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended A-Frame Jack with Most Ground Clearance
- Q&A: Can Ultimate Trailer Jack 322-RDJ-2K Be Completely Removed From Mounting Bracket?
- Q&A: Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle
- Article: 2023 Best Gifts for Haulers & Towers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule