Installing Electric Brakes - What Does The Initial Adjustment Consist Of?
Question:
The product video mentions an initial adjustment, after which no manual adjustment is needed. Can you explain what the initial adjustment consists of?
asked by: Dennis M
Helpful Expert Reply:
I can definitely help with that. You will need to do an initial adjustment when installing the Electric Trailer Brake Assemblies # 23-434-435. Once you have the brakes and hubs installed, you will turn the adjustment screw located inside the back of the brake assembly. This will expand the brake shoes and create more drag. The idea is that you want to still be able to turn the hub by hand, but it will not spin freely. So there should be a bit of resistance, but not too much or your brakes will lock up.
You will also need to "break in" or "bed" the new brakes after your initial adjustment. We created a guide on how to install, adjust, and bed your new brakes. I think you will find it very helpful. Take a look at the link below. It will explain the steps in greater detail.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 8K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 8K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Tell if 10K Dexter Nev-R-Adjust Electric Trailer Brakes Are for Driver or Passenger Side
- Q&A: Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Is Thinline Opti-Brite LED Interior Strip Light ILL72CB Good for Interior Cook Top Lighting
- Q&A: What Causes Trailer Tires to Cup
- Q&A: Are Dexter 8k Brake Assemblies and Al Ko Assemblies Interchangeable
- Q&A: Recommended Trailer Brake Kit For Gatormade Aardvark With 8k Dexter Axles
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Choose the Right Trailer Hitch Class
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Gooseneck to 5th Wheel Adapters