Lift Kit Compatible With a Keystone Fuzion 5TH Wheel Toy Hauler

Question

Question:

I dont actually need more ground clearance but I pull my 5th wheel Fuzion toy hauler with my F-450 and it has a 4inch lift on 37inch tires. I need to level out my trailer in order to fix the nose high pull when hooked up and level it out to have more equal weight distribution on the axles. Do I need a lift kit like P/N K71-725-02? What is the best way to correct the issue?

asked by: Kent K

0

Expert Reply:

If your Keystone Fuzion 5th wheel toy hauler uses Dexter # 12 Torflex torsion axles then the Lift Kit # K71-725-02 is what you will need to raise the trailer 3-1/8". As most of these types of trailers use double eye leaf springs it is more likely you will need either the Tandem Axle Lift Kit # RR23QX or Triple Axle Lift Kit # RR55QX depending on your number of axles. This will give you either 1-1/4" or 2-1/4" of lift depending on the setting which best levels with your F-450.

expert reply by: Bud M

0

Answer 1

A lifted truck usually brings with it some complications for towing purposes. A trailer axle over-under conversion can be a solution to correcting some of the variance in the heights of the tow vehicle and trailer, but this too comes at a high…

view full answer...

Answer 2

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 3

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't…

view full answer...

Answer 4

Hey Robert, for a 5,200 lb Dexter Torflex axle like what you have we have the Dexter lift kit part #K71-724-02 which will give you a lift of 2-7/8 inches.

view full answer...

Answer 5

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers…

view full answer...

Answer 6

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all…

view full answer...

Answer 7

Sounds like you have torsion axles which is the other common trailer suspension setup aside from leaf springs. The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is…

view full answer...

Answer 8

Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders…

view full answer...

Answer 9

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...