Do the Maxtrax MKII Recovery Boards Have a Weight Capacity  

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

I pulled one of the Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 from the warehouse and measured it and found that the cross tube was approximately 68-3/8" in length. Knowing how manufacturers are I'm sure the intended size is…

Yes Yakima roof racks can fit the Thule roof rack tracks. To do that you will need 4 of the Yakima Control Towers #Y8890027, 2 sets of the Yakima Landing Pad #Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use #Y00409, for 66 in…

There is indeed a trailer hitch receiver that fits your 2024 Subaru Crosstrek Wilderness, from Curt, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13382 I verified this fit with the manufacturer for you, and it…

The receiver tube of the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR is going to stick out 4-11/16" past the crossmember and since both tubes are 2" x 2" the height from the bottom of the receiver tube to the top of…

I checked with Stromberg Carlson and their multi-fit hitch part #SC45MR has the hitch opening surface 4-11/16 inches away from crosstube of the hitch.

The center to center measurement of the mounting bracket bolt-holes for the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR is 5-7/8". Additionally, there are two other bolts holes on the angle brackets that measure 3-1/8"…