How To Install The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118345
Question:
Hi I have a Tekonsha 118345 trailer kit for my 1997 Ford Explorer XL and I would like to know where the A three white connector and B connector with two white wires go in this hookup?
asked by: Gerhard
Helpful Expert Reply:
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118345 is going to have a male and female connector pair for the right turn-stop, left turn/stop, and running lights.
The male connector with the yellow wire will plug into the top socket of the driver's side tail light and the female connector with white wires paired with it will connect to the plug you removed from the tail light.
The male connector with the red wire will connect to the black center socket on the tail light and the female connector with white wires will connect to the plug you removed.
The male connector with the green wire will run over to the passenger's side and connect to the top gray taillight socket and the female conector paired with it will connect to the plug you just removed.
