Is The Fastway Lock Set Compatible With e2 Weight Distribution Hitch?
Question:
Fastway Flash 86-00-3660 Flash E-Series Can my Fastway E2 adjustable hitch height be adjusted by using these adjustment pins? Its not clear to me if they are compatible with my older E2 hitch system. I have two tow vehicles with very different heights and want to be able to easily adjust the height of the hitch and avoid buying a second hitch. What will work for my setup?
asked by: Anthony D
Expert Reply:
The Fastway Trailer Hitch Lock and Adjustment Pin Lock Set # FA86-00-3660 is only compatible with the ball mount platforms like the Flash # FA42-00-2400. With the Fastway e2 weight distribution you have to use the bolts and nuts since the hitch head has an adjustable pitch angle. We do have the BulletProof Hitches 2-Ball Mount # MD204 which you can use with the Weight Distribution Shank # 358WEIGHTDIST. This will allow you to quickly adjust the hitch height for the Fastway e2 for different height tow vehicles.
The InfiniteRule Locking Pins # 34061674-D will allow you to secure either the included ball mount or the weight distribution shank to your tow vehicles.
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Products Referenced in This Question
InfiniteRule Locking Pins for BulletProof Ball Mount - Stainless Steel - Qty 3
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Locks
- Locking Pin
- InfiniteRule
more information >
Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 6500 lbs GTW
- BulletProof Hitches
more information >
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Aluminum Shank - Silver
- Drop - 4 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Fastway
more information >
BulletProof Hitches 2-Ball Mount for 2" Hitch - 6-1/4" Drop, 6-3/4" Rise - 14,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 6 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- 14000 lbs GTW
- BulletProof Hitches
more information >
Product Page this Question was Asked From
Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Steel
- Fits 2 Inch Hitch
- Bent Pin
- Flush Pin
- 3-5/8 Inch Span
- 3-7/8 Inch Span
- Fastway
more information >
Continue Researching
- Article: Enjoy The 2024 Eclipse With Harvest Hosts
- Article: How to Measure for Trailer Hitch Drop
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: Proper Orientation of Trailer Electric Brake Assemblies
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Select Correct Ball Mount to Keep Pop-Up Camper Trailer Level When Hitched
- Q&A: Can Hitch Pin that's Longer Than Needed Affect Anything
- Q&A: Weight Capacity of Trailer Hitch Pins
- Q&A: Replacement Seals for AL-KO 1536852 Seals
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Trailer Hitch Receiver Sizes
- Q&A: What is Max Drop of Gen-Y Torsion 2-Ball Mount and Can be Used with Weight Distribution
- Q&A: Waterproof Cover for Utility Trailer