Recommended Front SumoSprings for 2007 Bigfoot Motorhome on E-450 Chassis

Question

Question:

Which ones for the front of my 2007 Bigfoot M/H Ford E450?

asked by: James H

0

Expert Reply:

The SumoSprings Solo Custom Helper Springs # SSF-111-60 are the best choice for your 2007 Bigfoot. These will support the front of your motorhome, smooth out your ride, and help to minimize sway. They also have a 4,000 lb capacity and come with a limited lifetime warranty.

expert reply by: Robin H

0

Answer 1

The ride in your 2018 Ford E-450 will be improved to a certain degree by the SumoSprings - Front Axle #SSF-106-40 and Rear Axle #SSR-130-47, but they will not give you a ride that is as cushioned as air bags. So for the main purpose of improving a…

view full answer...

Answer 2

Thank you for providing the details of your Class C 2007 Forest River Lexington GTS 255DS motorhome that is built on the 2006 Ford E450 2WD chassis. The SumpSprings kits #SSF-106-40 (front) and #SSR-106-47-1 (rear) that you reviewed are excellent…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 5

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 6

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 12

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Recommended Front SumoSprings for 2007 Bigfoot Motorhome on E-450 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching