Troubleshooting a Stabilizer Jacks that Don't Operate With the Wall Switch

Question:

Hello, I have a 27rkss Wildwood that the rear stabilizer jacks are not working by the switch. They work by the remote but not the outside switch. I replaced the switch and still nothing. I also replaced the 6amp auto reset breaker. Still nothing. Fuses look all good. Any ideas?

asked by: Jennifer

Expert Reply:

The only other thing I can think of is that the wiring somewhere in your loom is damaged. Since you mentioned that you've confirmed it works when using a remote but not with the switch that would indicate that problem is somewhere between the jacks and the switch.

It's not going to be much fun but really your only option is to go through that wiring and make sure everything is up to snuff. you'll want to be looking for any sort of exposed or frayed wires, any broken wires, or anything that does not look good.

Chances are, there is going to be something there that'll need to be addressed and at that point you'll just need to cut away the porblem and replace the wire(s) in place and check to see if that resolves the issue.

expert reply by: Bryce D