Replacement Bearing Kit and Hub For Mobile Home Hub Using 25580 & LM67048 Bearings and Seal 442109
Question:
I have a mobile home hub I’m trying to replace and I have bearings and seal size. The hub id number is K-H 71744. The outer bearing is LM67048, inner bearing is T25580 and seal is 442109. Can you help me with this?
asked by: Lee B
Expert Reply:
Our Bearing Kit # BK3-300 contains your Inner Bearing # 25580, Outer Bearing # LM67048 and Seal 442109 # GS-2250DL. It also includes new races if these are the only parts you are needing for your hub.
If you are needing an entire hub the Dexter Trailer Hub and Drum Assembly # 8-174-5UC3 will fit your spindle after you replace the 2.125" seal which comes with the hub for the 2.250" Seal # GS-2250DL like you have. This hub does use a different Outer Bearing # 15123 which does have the same 1.250" inner diameter as your LM67048.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Q&A: Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine the Correct Replacement Bearings for a Trailer
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Can I Charge My Trailer Battery Using 7-Way Trailer Connector on Truck
- Q&A: How to Charge a Trailer Battery Through a 7-Way Connector
- Article: Big Truck Big RV
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub