Availability Of Threaded Bearing Buddy Bearing Protectors For a 1.98" Hub Bore With Fine Threads
Question:
Good Morning, I have a dust cap with 1.0 threads, diameter 1.98 inches What bearing buddy model do I need? Thank you
asked by: Bill S
0
Expert Reply:
You will need the Bearing Buddy Bearing Protectors # BB1980T-SS. This is our only threaded option for a 1.98" hub bore and 1.0 fine thread pitch.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Q&A: Suggested Replacements for Titan Coupler and Brake Calipers
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: Most Popular Wheel Bearings
- Q&A: Battery Charger for a Trailer Battery on a Dump Trailer
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers