Does The AKEBRK-35 Come With Hubs And Bearings
Question:
Dose the10 inch electric brake kit come with the hubs and all the bearing and races
asked by: Caroyll C
Helpful Expert Reply:
No, the electric brake kit # AKEBRK-35 does not come with hubs and bearings. # AKEBRK-35 includes the brake assemblies only. That being said, we do carry the hubs for a 3,500 lb axle. I recommend the # AKHD-555-35-EZ-K. This uses the standard L68149 inner bearing and L44649 outer bearing. This hub comes pre greased and packed with bearing seals and races. The grease caps and lug nuts are also included.
I have linked our assembly/installation video below if you want to take a look.
Products Referenced in This Question
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Recommended Hub & Drum & Brakes That Measures 10 x 2 1/4" and has a 5 on 4 1/2 Bolt Pattern
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: Can I Install Brakes On Only One Axle Of A 2 Axle Trailer And Which Axle Should They Go On?
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies