How is Tension Set with Solera Slide Topper
Question:
How do you adjust tension on Solara slide topper? Its too tight.
asked by: Jennifer
0
Expert Reply:
The tension for the Solera slide toppers is set by the amount of winds that the roller has before it's installed. I would recommend (if you are really careful) taking a couple winds out of yours and then reconnecting it and see if that gives you the tension you want.
The recommended amount of winds is 12 to 16 for reference.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Solera RV Slide-Out Awning - 79" Wide - White
- RV Awnings
- Slide-Out Awnings
- Extends 48 Inches
- 74 Inch Wide
- 75 Inch Wide
- 76 Inch Wide
- 77 Inch Wide
- 78 Inch Wide
- 79 Inch Wide
- White
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Does Cooper Work Series 215/75R17.5 Radial Tire w/ 17-1/2" Wheel Come Balanced
- Q&A: How to Add Tension to Solera Slide-Topper
- Q&A: How To Select The Right Awning Size For Slideout
- Q&A: How to Determine Leaf Spring For K-Z 5th Wheel Trailer With 5,200 lb Axles
- Q&A: Will Hardware Included With Solera RV Slide-Out Awning Protrude Through Trailer Wall
- Q&A: Plug-In Wire Harness For A Redarc Brake Controller In A 2022 Jeep Wagoneer
- Q&A: Selecting Solera Slide Topper For Rockwood Mini Lite 2503S
- Article: Best Ladder Racks
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Ram Trailer Tow Prep Package
- Article: Using a Portable Generator on RV
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Best Camper Jacks