Replacement Step Pad with Measurements As Close to 27-1/2" Long by 4-1/2" Wide as Possible

Question

Question:

I am looking for replacement step bar pads for an oval bar. My current pads are 27-1/2 long and 4-1/2 wide. I can make any pin locations work. Do you offer anything close to those dimensions? Thanks

asked by: Keith D

0

Expert Reply:

The closest replacement step bar pad we have to those measurements is the Replacement Step Pad for Westin Oval Slimline Tube Steps # 80-0231.

The Replacement Step Pad for Westin Oval Slimline Tube Steps # 80-0231 measures 25-3/4" long and 4-7/8" wide.

expert reply by: Scott S

0

Replacement Step Pad for Westin Dimensions
(click to enlarge)

Answer 1

I pulled one of the Replacement Step Pads For Westin Oval Tube Steps, part #22-5001 and took some measurements for you. As the attached photo shows, the pad has 7 posts that are staggered for mounting. The positions of the posts are noted on the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 4

The outer diameter of the upper tube of the Andersen Ultimate Offset part #AM3140 is 4 inches.

view full answer...

Answer 5

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 6

The Replacement Step Pad for Aries 4" Wide Oval Nerf Bars #AA2090133 are longer than the ones that you currently have. The overall length is 23-5/8" long. The center 2 pegs are 12-5/8" apart on center and the outer pegs are another…

view full answer...

Answer 7

Actually, if you look closely the #AA2090161 has 4 pegs and a center pin used to align the step. Aries tells me that the #AA2090161 is indeed the proper replacement step for their 4 inch wide oval step bars. I've provided a photo showing the…

view full answer...

Answer 8

We do indeed offer replacement step pads. There are two possible replacement pads for the Aries Automotive #AAS224046-2 step pads. You an look on the bottom of the pad that came loose and you'll immediately be able to determine which one you…

view full answer...

Answer 9

I attached a picture that shows all of the pin dimensions of the Aries step pad part #AA2090139 which you'd be able to use to determine if this is correct for your step bars. The overall length of the pad is 21-1/4 inches and the width is 3…

view full answer...

Answer 10

The Westin Replacement E-series Step Pad, #23-0001, measures 3-5/8, 5-5/8, 6-3/8, 3-5/8 inches from one end pin to the other. I have attached a photo showing the measurements I took for you. The best way to find the correct replacement step pads is…

view full answer...

Answer 11

Unfortunately that part number does not cross-reference with anything I have. I also googled that part number with no results. Can you take some length and width dimensions as well as stud too stud measurements for me so I can determine compatibility…

view full answer...

Answer 12

I spoke with Aries and they informed me that the Replacement Step Pad for Aries 4" Wide Oval Nerf Bars part #AA2090161 is 23-5/8" long x 4" wide and the pins are spaced 4-3/4" apart from the first to second and third to forth. The…

view full answer...

Replacement Step Pad with Measurements As Close to 27-1/2" Long by 4-1/2" Wide as Possible

Product Page this Question was Asked From

Continue Researching