Will the Dexter 10 Inch Hub and TruRyde 10 Brake Assembly Work Together?
Question:
Parts number Tru36FR and 84546uc3-EZ are compatibles? And the second ine come 1 side or both? And the drums are compatible with any 4 holes base?
asked by: Reinaldo
Expert Reply:
Yes, they are. The Dexter Trailer Hub & Drum Assembly item # 84546UC3-EZ and the TruRyde Electric Trailer Brake Kit item # TRU36FR are both compatible. The Hub comes individually you will need two per axle and the brakes come as a set so you will only need one per axle.
Hopefully the information below answers your question about the 4 holes base.
The Hub and Drum Assembly item # 84546UC3-EZ is compatible with trailer's that use inner bearing item # L68149 (1.378" inner diameter) and outer bearing item # L44649 (1.063" inner diameter).
The Electric Trailer Brake Kit item # TRU36FR uses a 4 bolt mounting flange to attach to your trailer's axle. It will look like this item # 4-34.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Lid and Lift Arm for Dometic 810263
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Replacement For An Innoflame RV42D80F-C1 Fireplace
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Can Electric Brakes be Used on a Boat Trailer