Info Needed to Install 6 Lug Bolt Pattern Hub on 2022 Aluma 7712HSLR
Question:
I have a 3inch lifted 2022 Aluma 7712HSLR no brakes . I believe its currently 5x5.5 , I wish to convert it to toyota 6x5.5. What do I need to convert the hub/axle ?
asked by: Erik
Helpful Expert Reply:
All we need to know is the axle capacity to see if we have a hub with the bolt pattern you need. Or if you can get me the diameter of the spindle where the bearings and seal rides that would be good too. Axle diameter can be used too. If it's 2-3/8 inch it's a 3,500 lb axle and the # CE13611 would fit and has correct bolt pattern.
If it's 3 inch and between 5,200 and 7k the part # 8-213-5UC1-EZ would fit and be correct bolt pattern.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Q&A: Recommended Replacement Brakes for TDE 46304 Brakes
- Article: Trailer Tire Sizing
- Q&A: Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Q&A: Will Chevrolet 6-on-5-1/2- Bolt Pattern Wheels Fit Trailer Idler Hub Assembly AKIHUB-655-35-K
- Q&A: Idler Hub Recommendation for a Trailer that has # 84 Spindles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer