What Is the Difference Between the 2.5K Version and the 5K Version of the SnapPad SnapJack?

Question

Question:

How can I tell if my rv needs the 2500 lb or the 5000 and what is the difference between them.

asked by: James F

0

Expert Reply:

There is no difference between the 2,500 version of the SnapPad SnapJack for RV Scissor Jack Stabilizers, and the 5K to 7K version # SN65FR.

The only difference between the two would be the capacity they can handle. In order to determine which one you'd need, you'd need to determine the capacity of your trailer jack and compare it to the feet and choose the set that matches your capacity.

expert reply by: Bryce D

0

Answer 1

The distance between the bolts on the SnapPad SnapJack for RV Scissor Jack Stabilizers #SN45FR is 2" on center which is the standard. The same is true for the higher rated #SN65FR. If you want to use these with your scissor jacks the only…

view full answer...

Answer 2

The spacing between the mounting holes on the SnapPad SnapJack for RV Scissor Jack Stabilizers #SN65FR is approximately 1-7/8".

view full answer...

Answer 3

The EZ Mount that comes with the Air Lift WirelessONE Suspension System for Air Helper Springs #AL77DQ is that U-Bolt and the bracket that comes mounted with the compressor. A lot of kits have you drilling into your vehicle frame to get the…

view full answer...

Answer 4

The tank that comes with the Air Lift WirelessAIR Suspension System for Air Helper Springs #AL27DQ is a 2-Gallon tank. When it comes to the physical dimensions, the tank measures 17" Long x 8" Tall x 6" Wide (see…

view full answer...

Answer 5

The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 is definitely suitable for long term use and will not put any excess strain on the trailer. The adapter is a good solution for anyone that wants to use their 5th-wheel camping…

view full answer...

Answer 6

I may have a solution for you to help control your UTV in a better manner than your current ratchet straps are doing when it's loaded on the trailer, but I'm not aware of any shock system available that will mount to torsion axles. We've…

view full answer...

Answer 7

Once the programming is complete you would be able to remove the SuperChips part #SU1845. It only needs to be connected when programming. After that you could put it in the glove box.

view full answer...

Answer 8

Superchips states that with their programmer part #SU1845 installed on your 2012 Ford F-150 with a 5.0 liter V8 you would expect horsepower gains of up to 24.4 and torque gains of up to 24.6 ft lbs.

view full answer...

Answer 9

A few of our scissor jacks have different weight capacities. For example, the part #UF48-979002 has a 6,500 lb capacity, the part #TJSC-24 has a 2,500 capacity and the #JSC-24-IND has a 5,000 lb capacity.

view full answer...

Answer 10

With your toy hauler weighing 10,000 pounds and ripping off two each jack would have a weight capacity of 2,500 pounds. The Scissor Stabilizer Jacks w/ Handle #TJSCHD-24 would be the correct jacks for you. These leveling scissor jacks with a…

view full answer...

Answer 11

Yep, you can definitely load bikes with fenders on the Kuat Piston Pro Bike Rack for 2 Bikes - 1-1/4" Hitch #KU66ZR or 2" Hitch #KU76ZR. For either rack, all you need to do is wrap straps around the tire and ratcheting arm with the Fender…

view full answer...

Answer 12

Basically, one friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer's GTW is between 6,000 lbs and 10,000 lbs, you will need two sway-control units, one on each side of the trailer. You will also want to…

view full answer...

What Is the Difference Between the 2.5K Version and the 5K Version of the SnapPad SnapJack?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching