Recommended Crossbars for a 2020 Ford Ranger w/ a RetraxPRO XR Tonneau Cover
Question:
I have a 2020 Ford Ranger with a Retrax PRO MX Retractable Truck Bed Tonneau Cover and I want to put a set of truck bed crossbars to fit into the T-slots that are in the cover. Please recommend what I need to get. Crossbars of 71 is quite wide.
asked by: Tom P
Expert Reply:
I have a solution for you but our next size down kit is going to be the 65" Rhino-Rack Vortex Crossbars for Retrax XR Tonnneau Covers item # RRVA165B-RRRLT600 but this is still too wide. From what I could find online the bed of a 2020 Ranger measures 72.8" L x 44.8" W x 20.8" T.
With this in mind, I recommend buying two sets of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600H and using the 49" long Rhino-Rack Vortex Aero Crossbars item # RRVA126B-2. The Quick Mount Legs are the same ones that come with the longer kits and these 49" crossbars are what is recommended for your Ranger if you were adding a roof rack.
The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600H are sold as a pair so you will need to purchase two and the 49" long Rhino-Rack Vortex Aero Crossbars item # RRVA126B-2 are sold in pairs so you will only need to purchase one pair.
These legs are confirmed to fit inside the tracks of the RetraxPRO XR Hard Tonneau Cover item # RTX68FR. If you have the shorter bed the crossbar set up will still work the bed length won't affect my recommendation.
Products Referenced in This Question
Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2
- Roof Rack
- Feet
- 2 Pack
- Rhino Rack
more information >
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
- Roof Rack
- Crossbars
- Aero Bars
- 49 Inch Bar Space
- 2 Bars
- Overhang
- Black
- Rhino Rack
more information >
RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots
- Tonneau Covers
- Retractable - Manual
- Rack Compatible
- Opens at Tailgate
- Low Profile - Top of Bed Rails
- Aluminum
- Matte
- Retrax
more information >
Product Page this Question was Asked From
Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers - Black - 65" L
- Accessories and Parts
- Tonneau Covers
- Crossbars
- Mountain Top EVO-M
- Rextrax XR Series
- Rhino Rack
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What Roof Rack Kits Will Work with the RetraxPRO XR Hard Tonneau Covers
- Q&A: Recommended Crossbar Length for Rhino-Rack Vortex Rack for Retrax Pro XR series Tonneau Cover
- Q&A: Recommended Crossbars for a RetraxPRO XR Tonneau Cover
- Q&A: Are Spacers Needed For Rhino-Rack Vortex Crossbar System for Retrax XR Tonneau Covers
- Q&A: Crossbar Recommendation for Truck with Retrax Tonneau Channels
- Q&A: Yakima Landing Pad 1 vs. Landing Pad 26
- Q&A: Yakima Crossbar Setup For Retrax Pro XR Tonneau Cover
- Article: Roof Rack Information
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Stability Control for Heavy Duty Vehicles
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Measure for Trailer Hitch Drop