Parts Needed to Add a 7-Way to a 2010 Lexus RX350
Question:
Hi. Im trying to find a wire harness that will work with the harness on my trailer. I can send a photo of the harness connector. Its round and everything I found on your site so far seems to be flat. Is there an adapter that will work?
asked by: Greg L
Expert Reply:
It sounds like you have a 7-way connector on your trailer. We do have a kit that will allow you to add a 7-way to your 2010 Lexus RX350. That kit is the Universal Installation Kit for Trailer Brake Controller # ETBC7.
To use the # ETBC7, you will need to have a 4-way on your RX350. If you already have one, the # ETBC7 will adapt it into a 7-way. If you do not have one, you will need to add one to be adapted.
The T-One Vehicle Wiring Harness # 118255 works if you do not have the factory tow package.
The T-One Vehicle Wiring Harness # 118252 works if you do have the factory tow package.
If your trailer has a 7-way plug, then you likely have trailer brakes and you will need a brake controller. I personally like the Redarc Tow-Pro Elite Brake Controller # RED44FR because it offers a sleek more factory like appearance when installed.
On the off chance your trailer has a 4-way round, there is the Custer Trailer Connector Adapter # ADP001 which adapts the trailers 4-way round into a 4-way flat.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Custer Trailer Connector Adapter - 4-Way Round to 4-Way Flat
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 4 Round
- Plug and Lead
- 4 Flat
- Custer
more information >
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Where Do the Wires on the Universal Install Kit for Trailer Brake Controllers Get Installed?
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Q&A: Parts Needed to Tow Trailer With Brakes Using 1992 Dodge D250
- Q&A: 4-Flat Trailer Wiring For 2024 Jeep Wrangler With Tow Bar Wiring