Recommended Bike Rack for a Ariel Rider Class D E-Bike

Question

Question:

I have an Ariel Rider Class D ebike and this bike has double frame where the Hollywood rack hook attach. Will the hook wide enough to clamp it on double frames bike?

asked by: Aurelio D

0

Expert Reply:

The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item # HLY84FR will be a great option for your Ariel Rider Class D E-Bike. It has a 80 lbs capacity and fits tires up to 5" wide. The hook will work with your dual frame.

expert reply by: Jerred H

0

Ariel Rider
(click to enlarge)

Answer 1

Thanks for the picture and congrats on the new trailer! There is only one replacement option for the Turning Point Pin Box and it is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. Reese doesn't have one. The…

view full answer...

Answer 2

I contacted the manufacturer regarding the over compression issue on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR which is the HR1500. They said it is a fairly common issue and gave me some tips on ways to help fix it.…

view full answer...

Answer 3

For a fat tire e-bike rack that is designed for a 2 inch hitch the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR would be a really great option. This can fit tires up to 5 inches in width and has an 80 lb weight capacity which would be needed…

view full answer...

Answer 4

There's three options to mount a Demco Hijacker 16k 5th wheel hitch in the bed of your long bed 2017 Ram 3500. Which one you need will depend on the legs your 5th wheel hitch has and whether or not your Ram has the factory tow package. I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…

view full answer...

Answer 10

We noticed when we installed the etrailer Trailer Hitch Receiver #e98856 on a similar 2022 Jeep Wrangler it had 8" from the center of the hitch pin to the rear edge of the stock spare tire. This would likely not allow you to fold up the…

view full answer...

Answer 11

Your best platform bike rack for spare clearance is the RV Rider part #HLY64FR as it has the most clearance between the hitch pin hole and the wheel trays. This has 12 inches from the pin hole to the pivoting portion of the rack but then has even…

view full answer...

Answer 12

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Recommended Bike Rack for a Ariel Rider Class D E-Bike

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching