What is The Difference In The Dexter Trailer Hub/Drum Assemblies # 84656UC3 & # 84656UC3-EZ?
Question:
On the Dexter 84656UC3 vs 84656UC3-EZ. Is there a difference other than the cap? All the specs, Bearing, Race, and Seal Information are the same. other than wheel size, which doesnt make sense, since all the dimensions of the drum is the same. Thanks!
asked by: Nathan
Helpful Expert Reply:
You are correct the only difference in the Dexter Trailer Hub and Drum Assemblies # 84656UC3 and # 84656UC3-EZ is the grease cap. The Kit # 84656UC3-EZ uses an EZ Lube # DC200L-DCRP cap while the other has a standard Grease Cap # F001518 spindles without a grease cap.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Grease Cap - 1.988" Outer Diameter - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Hubs/Drums will Fit My Dexter 4,400 Pound Axle?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: Adding a 7-Way Trailer Wiring Harness to a 2008 Ford E-150 Van with Factory 4-Way
- Q&A: Will I Get A Pair Of Trailer Hub And Brake Assemblies With Part # 8-407-5UC3-EZ
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)