How To Reset Edge Performance Tuner When Replacing Vehicle PCM
Question:
I had programmed the edge to Power level 1. I then replaced my PCM which comes programmed to vehicle stock. How do I reset my edge back to Power level 0 for the new PCM? Thanks
asked by: Bruce W
0
Expert Reply:
To reset the Edge Gas Evolution CTS3 Performance Tuner # EP59YR so it will work with your new PCM you have to reinstall the original PCM and reset the vehicle back to the stock setting. Then you will be able to install the new PCM and change the power levels. The Edge is only capable of saving the settings for one vehicle and will not work with multiple vehicles/computer systems at the same time.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Edge Gas Evolution CTS3 Performance Tuner - Color Screen
- Performance Chip
- Performance Tuners
- With Monitor
- Color Touch Screen
- No - Not California Approved
- Evolution
- Edge
more information >
Continue Researching
- Q&A: Recommended Tuner for 2018 Ford F-150 with 5.0L Engine
- Q&A: How to Determine if Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2 Slipper Springs Will Work
- Article: Performance Chips and Modules
- Article: Gooseneck Trailer Hitch Information and Review
- Q&A: How To Attach Safety Chains To Trailer Tongue
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Q&A: How to Choose Correct Capacity for Trailer Safety Chains
- Q&A: Why Would Right Turn Signal Come on When Left Turn Signal is On for Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Best Air Bag Suspension (2023)
- Article: Stability Control for Heavy Duty Vehicles
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams