Will the Curt Chrome Hitch Ball # C40007 Fit a 3/8 Inch to 7/8 Inch Thick Ball Mount Platform
Question:
does this fit ball mounts that are 3/8 to 7/8inch thick?
asked by: Steve
0
Expert Reply:
Yes, the Curt Chrome Hitch Ball, # C40007, will just barely fit on a ball mount platform that is 7/8 inch thick. If your ball mount is 7/8 inch thick, you will have 2 or 3 threads showing past the nut, but the nut would fully engage the threads on the hitch ball shank.
expert reply by:
John H
0
Product Page this Question was Asked From
2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Parts Needed to Install Redarc Tow Pro Elite in 2008 Dodge Sprinter with 7-Way
- Q&A: Recommended Replacement Sway Control Brackets for an Equal-i-Zer Weight Distribution System
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Will The Firestone Ride-Rite Air Springs Fit a 2024 Chevy Silverado 3500?
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Should The Gen-Y Glyder Shock Absorbing Ball Mount Slope Down Under Load?
- Q&A: Type of Hardware for Installing Optronics License Plate Holder LP35BB
- Q&A: What Type of Mounting Screws Should be Used to Install Enclosed Cargo Trailer License Plate Holder
- Q&A: What Does Yellow Wire of 7-Way Molded Trailer Wire Connector H20044 Wire To
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight