Replacement Hub for Dexter 8-256 that Has 5 on 5 inch Bolt Pattern
Question:
I have 2 Dexter 8-256 hubs that I took off to inspect and re-pack bearings. I cannot seem to get the inner seal off of the first one I took of the spindle, so Im guessing a replacement is warranted lol. I have 5 on 5inch bolt pattern, but there are no identifying marks on the outer bearings. With that info, do you think the AKIHUB-550-35-K assembly would work for me? Trailer is a 2004 Miky 12x6foot utility trailer. Thanks for your help in advance
asked by: Sam D
Helpful Expert Reply:
For a replacement hub for your Dexter 8-256 that has a 5 on 5 inch bolt pattern you would want the part # 84550BX which comes with replacement bearings and a seal.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Differences Between Trailer Idler Hubs With a 5 on 5 Bolt Pattern
- Q&A: Replacement Idler Hub for 3,500 lb Big Tex Trailer Axle with 5 on 5" Bolt Pattern
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Maintenance Schedule
- Q&A: Recommended Extension Cord for Badlands Winch Hidden Behind a Bumper
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Recommended Grease Caps for 2.04 Inch Diameter Hub Bore on Trailer
- Q&A: Availability Of Trailer Idler Hub With 5 on 5 Bolt Pattern
- Q&A: Parts Needed To Switch a 3,500LB Axle To 5 on 5" Idler Hubs on 5X8 Utility Trailer
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: Brake Controller Installation: Starting from Scratch