Wiring a HiddenHitch/Pilot Brake Controller to a 2007 Chevy 2500HD Classic Body

Question:

i purchased this controller about a year ago and dont have the wiring.directions to it any longer. im wiring it up to a 2007 2500 hd classic with the manufacturer jumper plug i just want tomake sure the wires on the controller are the same.im not really sure what model it is even the top just sayshiddenhitch pilot.and it has a large black small red small white and a large blue wire on it.if you could please help i would appreciate it. Thanks

asked by: matt h

Expert Reply:

The HiddenHitch Pilot controller you have follows the standard wire coding for brake controllers. Blue is the wire that sends the power to the trailer brakes, black goes to the battery for 12v power, white is a ground wire, and red gets the stop light signal from the brake pedal.

I would suggest using part # 20264. It will plug into the port under your dash, and you will match the wire leads color for color to the wire leads coming out of the back of the controller.

I could not find an order with your name or email address so I cannot be sure of what brake controller you have. I have included a link to the instructions of the brake controller you were looking at when you asked the question, part # 80550.

expert reply by: Patrick B