Replacement 5 Lug Hubs/Drums and 12" Brakes for Mobile Home Axle
Question:
I need electric brake kits for a 1960s construction Tri-Axle trailer with 5-spoke utility wheels. The bearings on the spoke drum are the same as the Dexter 22021-style drum. The bolt pattern on the brake assembly is a 7.5inch bolt circle or 4-7/16inch from bolt hole to bolt hole. 5-Hole Is there an aftermarket brake assembly with this bolt pattern? The center hole from the old backing plate is a 4inch circle. Not sure if I can re-drill the mounting flange for the newer 3-7/8inch bolt circle mounting pattern. I will also need 4 drums for this brake retrofit. I can provide pictures as well.
asked by: Arthur M
Expert Reply:
It sounds like you're looking for the Dexter Trailer Hub and Drum Assembly part # 8-174-5UC3. In regards to the braking assemblies, I don't think we have anything that matches up with what you said you had, only option we could offer is a new brake flange like the Brake Mounting Flange for 3" Round Axle part # 4-44-1 which requires welding and then the Dexter Electric Trailer Brake Kit part # 23-180-181. The other option you have would be to get some new custom axles. Unfortunately, parts for these mobile home axles are very hard to come by as they are considered a one time use part.
![Conner L](https://images.etrailer.com/static/images/catg/people/1234_tn.jpg)
Products Referenced in This Question
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Continue Researching
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Q&A: Can Factory Brake Controller Be Installed on 2018 Chevy Silverado
- Q&A: Recommended Axle-Less Suspension For Trailer With 3,500 Lb Wide Axle
- Q&A: Replacing Wheels on a Trailer with 5 Spoke Utility Hubs and 8-14.5 Size Tires
- Article: Trailer Wiring Diagrams
- Q&A: Common Torque Specifications for Lug Nut Size
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Hubs for a Hudson Bros. Trailer with 5-Spoke Utility Hubs
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)