Replacement For Trailer Bearing L44649
Question:
just bought a wheel bearing replacement kit for my light duty trailer, but the spindle seal is the wrong ID, its too small. The OD seems fine. I measure the ID not including the rubber to be 1 5/8 inches. All the number are worn off but the bearing is #144649. Can you help?
asked by: Mike
0
Expert Reply:
I can definitely help, and I know that it looks like a "1" in front of 44649 but that's actually an "L" so the bearing you need is the following:
- Replacement Trailer Hub Bearing # L44649
If you also need the race, the correct one for this bearing is the Replacement Race # L44610.
expert reply by:
Kyle S
0
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Article: Adding Electric Over Hydraulic Disc Brakes