Should Angle Set Bolt Be Tightened for Equal-i-zer Weight Distribution System

Question:

the large piece that has the ball attached has 2 through bolts with with wassers on the top with a pin for them to be placed on .. the bottom has a bolt that can be adjusted to put pressure on the bottom Should the bolt be adjusted so there is no movement . with the ball moving up and down ?

asked by: Glen D

Expert Reply:

Yes, you need to have the angle set bolt of the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37120ET snugged up so the head unit isn't moving while you're towing. The only parts that should be moving are the arms.

expert reply by: Jon G