5th Wheel Trailer Hitch Installation Kit and Wiring for a 1999 Ford F-250
Question:
I need to install the rails that will fit my older Fifth Wheel Drawtite Slider hitch. My truck is a 1999 Ford F250 Super Duty Extended Cab 4 door pickup, V10. What rail kit would you recommend ? The least amount of drilling the better. Also looking for a wiring Kit.
asked by: Dale W
Expert Reply:
The easiest custom installation kit for a 1999 Ford F-250 is going to be # RP56005-53. The frame brackets mount on the outsides of the frame rails and there is minimal drilling. I have included links to the installation instructions and a link to a video showing a typical installation for you.
The rails have the standard 3 sets of slots to mount a hitch. The outer set is 29 inches apart. The middle set is 20-1/2 inches apart, and the inner set is 10 inches apart (all on center).
For in-bed wiring you can use # 41157. It just plugs in line with the 7-Way trailer connector.
Products Referenced in This Question
Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 10 Feet Long
- Custom Fit
- 7 Round - Blade
- Hopkins
more information >
Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Product Page this Question was Asked From
Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Fifth Wheel Installation Kit
- Universal
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Gooseneck to 5th Wheel Adapters
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Will the Adapter Rails for Curt 5th Wheel Hitch's Work With Reese 16K 5th Wheel Hitch
- Q&A: How to Convert a Demco AutoSlide 5th Wheel Hitch to Fit in the Ford Factory Puck System
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Can Aftermarket Puck System Be Installed on a 2024 GMC Sierra 3500
- Article: Ram Trailer Tow Prep Package
- Q&A: Gooseneck Hitch Adapter Recommendation for the Demco Fifth Wheel UMS Rail Kit DM8551010
- Q&A: Installing Fifth Wheel Hitch Bed Rails in Truck with Bed Liner