Solution for Needing Replacement Drum for AL KO 12 inch Hub/Drum
Question:
Electric brakes. Can I buy the plate that the magnet pulls to? The plate has bad groves in it. AL-CO 12”x 2” 6x51/2 inch bolt spacing. My book shows part 363200 idler hub but I don’t think it is the plate. Maybe a new drum with correct plate. Thank you very much for your help
asked by: Mike W
0
Expert Reply:
The armature surface of a hub/drum is not sold separately so if yours is damaged it would be time for a new hub/drum. So since you have an AL KO 12 inch hub drum with a 6 on 5-1/2 inch bolt pattern the hub you would want is the part # AKHD-655-6-K.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZ
- Q&A: Should There Be Any Play After Installing An Easy Grease Trailer Hub and Drum Assembly
- Q&A: Does Dexter Trailer Hub and Drum Assembly Include E-Z Lube and Standard Grease Cap
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle