Will Demco Hydraulic Brake Actuator DM8759532 Work With Trailer That Has 3,500 lb Axle
Question:
WILL THIS COUPLER WORK ON A TRAILER THAT IS A SINGLE 3500# AXLE WITH 10IN BRAKES
asked by: STEVE K
0
Expert Reply:
Yes, the Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - Adjustable Channel Down - 8,000 lbs # DM8759532 will work on a trailer with a single, 3,500 lb axle and 10 inch brakes.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - Adjustable Channel Down - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- A-Frame Coupler
- Weld-On
- 8000 lbs GTW
- Channel Only
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Surge Brake Actuator And Lockout Solenoid For A Homemade Dump Trailer
- Q&A: Replacement Actuator and Coupler for 2013 Jayco Jay Flight
- Q&A: Is The Composite Or Steel Demco EZ Latch Coupler A Better Choice Over The Other?
- Q&A: Is Adapter Fitting # T4871700 an Inverted Flare
- Q&A: Replacement for Old A-Frame Surge Brake Actuator
- Q&A: 3/16 inch to 1/4 inch Thread Adapter for Use with Dexter EOH Actuator K71-650
- Q&A: Can Surge Brakes be Added to 1996 Scamp Trailer that Weighs 2,000 lbs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)