Replacement Hub/Drum for Aluma Enclosed Trailer
Question:
Need a spare trailer hub complete with bearings and seal for easier road side emergency change - for a 2006 7 x 12 single axle Aluma enclosed trailer .....Dexter axle # 69-47 on suspension arm casting....5 stud 4.3 spread.....wheel/tire is a 215/75R14
asked by: Scott D
0
Expert Reply:
Based on the info you listed it sounds like you have a 3,500 lb trailer axle and your wheels have a 5 on 4-1/2 inch bolt pattern so for a replacement hub/drum that is pre-greased and ready to install if needed you would wan the Easy Grease Hub part # AKHD-545-35-EZ-K and you'd be set.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer