bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
4 min
Q & A Icon

How can I Determine Which Size Spring Bars I Need for My Equal-i-Zer WDS?  

Question:

How do I know what spring tension is my bar is ? 400 or 600 lb ? Is it stamped on the bar? My are painted over so can’t read it.

0

Expert Reply:

It is not going to be stamped on the bars, unfortunately, The easiest way to determine which spring bars you have is to measure the inside hole on the head where the spring bars would go.

If you measured 1", then the correct bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0499;

If you measured 1-1/4", then the correct bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0699;

If your measurement is 1-3/8", then the bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-1099;

If the measurement is 1-1/2", then the bars you'd need are the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-1499.

expert reply by:
0
Bryce D
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Review of Equal-i-zer Replacement Square Spring Bars For 1K Tongue Weight - EQ90-01-1099
Review of Equal-i-zer Replacement Square Spring Bars For 1K Tongue Weight - EQ90-01-1099 - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>