Recommended Spare Parts for the Timbren Axle-Less Trailer Suspension System item # A20RS545
Question:
I built a boat trailer using these axles: Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Regular Tires - 2,000 lbs - A20RS545 Id like to carry spare parts for my trailer in case a bearing goes while Im on the road. Can you recommend the proper bearings, and any additional parts that would be wise to have on hand as Im often far out in the woods with this. Thanks,
asked by: Eric G
Expert Reply:
The correct bearing kit for the Timbren Axle-Less Trailer Suspension System item # A20RS545 is going to be item # DBRKHW2SS. This kit has four item # L44649 bearings and two of the item # 10-9 grease seals. It also includes two replacement bearing buddy caps and 10 lug nuts.
You could keep one or two of the Dexter Trailer Idler Hub Assembly item # 8-258-5UC1-EZ on hand as well. This has the same 5 on 4-1/2 lug pattern and fits a item # L44649 inner and outer bearing.
To save space you could also keep the LubriMatic Mini Grease Gun Kit with Multi-Purpose Grease item # L30132 on hand.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Bearing Kit for Trailer Brakes with 8" Hub/Rotor - E-Z Lube - 2,000 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 2000 lbs
- Bearing L44649
- etrailer
more information >
LubriMatic Mini Grease Gun Kit with Multi-Purpose Grease
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 3600 psi
- 3 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes