bing tracking image
Q & A Icon

Pro Series/Tekonsha Pilot Brake Controller Shows N.C. on Trailer with Electric Over Hydraulic Brakes  

Question:

hi, I have a Tokonsha brake controller that was working and displaying the digital voltage readout while connected to electric drum brakes. I have now removed the drums and replace with electric hydraulic disk brakes. Although the display is showing NC, the controller is working and regulating the voltage to the hydraulic actuator as per normal but the controller no longer displays the digital voltage readout. Can you help.

0

Expert Reply:

I do have an option for you but the Pro Series (Tekonsha) Pilot Trailer Brake Controller 80550 that you have now is not compatible with electric over hydraulic brakes, only electric. Therefore, you will need a new controller for which I recommend the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885. This is a proportional brake controller so it will brake much smoother than the Pro Series Pilot Trailer Brake Controller which is timed delay and it offers a plug-in fit as they use the same harness.

expert reply by:
0
Conner L
Pro Series/Tekonsha Pilot Brake Controller Shows N.C. on Trailer with Electric Over Hydraulic Brakes
Pro Series/Tekonsha Pilot Brake Controller Shows N.C. on Trailer with Electric Over Hydraulic Brakes
(click to enlarge)
Pro Series/Tekonsha Pilot Brake Controller Shows N.C. on Trailer with Electric Over Hydraulic Brakes
Pro Series/Tekonsha Pilot Brake Controller Shows N.C. on Trailer with Electric Over Hydraulic Brakes
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>