Can Brass Fittings Be Used With The Plastic Fittings On A Seaflo RV Water Pump
Question:
Can you thread brass fittings onto the 1/2inch npt connections of this pump? Or do they need to be plastic fittings?
asked by: BenP
Helpful Expert Reply:
Yes, since the Seaflo Diaphragm Pump for Boats and RVs # SE24FR has 1/2"-14 male NPT fittings for both to the inlet and outlet you would be able to use brass fittings instead of the included hose barb fittings, as long as you get the correct size and thread pitch.
To thread plastic and metal fittings together, the male fitting has to be plastic, and the female fitting has to be metal. When fittings with a tapered thread such as NPT are tightened, the male fitting is compressed, and the female fitting is stretched.
Product Page this Question was Asked From
Seaflo Diaphragm Pump for Boats and RVs - Open Flow - 5 GPM - 60 psi - 12V DC
- RV Water Pump
- Diaphragm Pump
- 5.5 gpm
- 60 psi
- 140F
- 60C
- 6 Fixtures
- 12V
- Seaflo
more information >
Continue Researching
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Q&A: Curt Hitch that Fits 2023 Toyota Crown Hybrid
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Dust Cover/Cap Solution for Harbor Freight Trailer
- Q&A: Quieter RV Water Pump Recommendation
- Q&A: Flow Max RV Fresh Water Pump Shutoff Test Pressure
- Q&A: Replacement Klauber Slide Out Motor A-300 K01336A300 for RV
- Q&A: Do I Need a Relay to Install Seaflo 5.5GPM On Dual Switches
- Article: How Your RV Water System Works: A Complete Newbie's Guide
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How Does an RV Water Pump Work?
- Article: Trailer Tire Sizing
- Article: Snow Tire Chains Explained: How Tire Chains Work & When to Use Them