How to Find Replacement Slipper Spring for Jet Ski Trailer
Question:
Im looking for a four-leaf spring for my jet ski trailer It measures 23 in from eye to eye socket One end is a slip end The other end is a eye that a bolt goes through I was searching on your website but couldnt find anything. If you need me to send a picture let me know I also think Im supposed to take the measurements from the middle of each eye to eye measuring 23 in the width is under 2 in
asked by: Rick
Expert Reply:
The length of the slipper spring is from the center of the eye to the end of the slipper. See the attached diagram below. The width and the capacity are also necessary when choosing a replacement, leaf count isn't very important and can vary. The capacity will be based on your axle.
For example, if you have a 30" long slipper spring that is 1-3/4" wide and a 1,800 lb axle you could use the # e29SR. I have attached a link to all of our slipper springs along with a helpful article on slipper spring suspension for your reference.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 1800 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 30 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Q&A: Correct Track Alignment Replacement Hanger Bolt Recommendation
- Search Results: leaf spring suspension
- Search Results: spare mount for trailers
- Search Results: 2 leaf spring
- Search Results: 2 leaf slipper spring
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Spring Keeper Bolt with Locknut for Slipper Springs - 3-1/4" Long
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: trailer lights
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Optronics Trailer Lights - Tail Lights - STL211XRFHB Review
- Video: Review of etrailer 4 Leaf Slipper Spring - e89SR
- Video: Best 2015 Cadillac SRX Trailer Wiring Options
- Search Results: slipper springs
- Video: Review of ABS Fasteners 1-3/4 Castle Nut Cotter Pin - 165649
- Search Results: cotter pin
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Will 3-Leaf Slipper Spring for 2,900-lb Trailer Axles Work On a 2,200 Lb Axle
- Q&A: Replacement Slipper Leaf Spring for Triton PWC Trailer
- Q&A: Replacement Slipper Springs 30 Inches From Center Of Spring Eye To End Of Spring
- Q&A: Replacement Slipper Springs for a 2,100 lb Trailer
- Video: Review of TruRyde Trailer Leaf Spring Suspension - Suspension Bolt and Locknut - TRFA73Z916DLNZ